We provide different versions of 101-500日本語 practice exam materials for our customers, among which the software version can stimulate the real exam for you but it only can be used in the windows operation system. It tries to simulate the 101-500日本語 best questions for our customers to learn and test at the same time and it has been proved to be good environment for IT workers to find deficiencies of their knowledge in the course of stimulation.
You will get to know the valuable exam tips and the latest question types in our 101-500日本語 certification training files, and there are special explanations for some difficult questions, which can help you to have a better understanding of the difficult questions. All of the questions we listed in our 101-500日本語 practice exam materials are the key points for the IT exam, and there is no doubt that you can practice all of 101-500日本語 best questions within 20 to 30 hours, even though the time you spend on it is very short, however the contents you have practiced are the quintessence for the IT exam. And of course, if you still have any misgivings, you can practice our 101-500日本語 certification training files again and again, which may help you to get the highest score in the IT exam.
| Topic | Details |
|---|
System Architecture |
| Determine and configure hardware settings | Weight:2
Description:Candidates should be able to determine and configure fundamental system hardware Key Knowledge Areas:
-Enable and disable integrated peripherals.
- Differentiate between the various types of mass storage devices.
- Determine hardware resources for devices.
-Tools and utilities to list various hardware information (e.g. lsusb, lspci, etc.).
-Tools and utilities to manipulate USB devices.
-Conceptual understanding of sysfs, udev and dbus. The following is a partial list of the used files, terms and utilities:
-/sys/
-/proc/
-/dev/
-modprobe
-lsmod
-lspci
-lsusb |
| Boot the system | Weight:3
Description:Candidates should be able to guide the system through the booting process. Key Knowledge Areas:
-Provide common commands to the boot loader and options to the kernel at boot time.
-Demonstrate knowledge of the boot sequence from BIOS/UEFI to boot completion.
-Understanding of SysVinit and systemd.
-Awareness of Upstart.
-Check boot events in the log files. The following is a partial list of the used files,terms and utilities:
-dmesg
- journalctl
-BIOS
- UEFI
-bootloader
-kernel
-initramfs
-init
-SysVinit
-systemd |
| Change runlevels / boot targets and shutdown or reboot system | Weight:3
Description:Candidates should be able to manage the SysVinit runlevel or systemd boot target of the system. This objective includes changing to single user mode, shutdown or rebooting the system. Candidates should be able to alert users before switching runlevels / boot targets and properly terminate processes. This objective also includes setting the default SysVinit runlevel or systemd boot target. It also includes awareness of Upstart as an alternative to SysVinit or systemd. Key Knowledge Areas:
-Set the default runlevel or boot target.
-Change between runlevels / boot targets including single user mode.
-Shutdown and reboot from the command line.
-Alert users before switching runlevels / boot targets or other major system events.
-Properly terminate processes.
-Awareness of acpid. The following is a partial list of the used files,terms and utilities:
-/etc/inittab
-shutdown
-init
-/etc/init.d/
-telinit
-systemd
-systemctl
-/etc/systemd/
-/usr/lib/systemd/
-wall |
Linux Installation and Package Management |
| Design hard disk layout | Weight:2
Description:Candidates should be able to design a disk partitioning scheme for a Linux system. Key Knowledge Areas:
- Allocate filesystems and swap space to separate partitions or disks.
-Tailor the design to the intended use of the system.
-Ensure the /boot partition conforms to the hardware architecture requirements for booting.
-Knowledge of basic features of LVM. The following is a partial list of the used files,terms and utilities:
-/ (root) filesystem
-/var filesystem
-/home filesystem
-/boot filesystem
-EFI System Partition (ESP)
-swap space
-mount points
-partitions |
| Install a boot manager | Weight:2
Description:Candidates should be able to select, install and configure a boot manager. Key Knowledge Areas:
-Providing alternative boot locations and backup boot options.
-Install and configure a boot loader such as GRUB Legacy.
-Perform basic configuration changes for GRUB 2.
-Interact with the boot loader. The following is a partial list of the used files, terms and utilities:
-menu.lst, grub.cfg and grub.conf
-grub-install
-grub-mkconfig
-MBR |
| Manage shared libraries | Weight:1
Description:Candidates should be able to determine the shared libraries that executable programs depend on and install them when necessary. Key Knowledge Areas:
-Identify shared libraries.
-Identify the typical locations of system libraries.
-Load shared libraries. The following is a partial list of the used files,terms and utilities:
-ldd
-ldconfig
-/etc/ld.so.conf
-LD_LIBRARY_PATH |
| Use Debian package management | Weight:3
Description:Candidates should be able to perform package management using the Debian package tools. Key Knowledge Areas:
-Install, upgrade and uninstall Debian binary packages.
-Find packages containing specific files or libraries which may or may not be installed.
-Obtain package information like version, content, dependencies, package integrity and installation status (whether or not the package is installed).
- Awareness of apt. The following is a partial list of the used files,terms and utilities:
-/etc/apt/sources.list
-dpkg
-dpkg-reconfigure
-apt-get
-apt-cache |
| Use RPM and YUM package management | Weight:3
Description:Candidates should be able to perform package management usingRPM, YUM and Zypper. Key Knowledge Areas:
-Install, re-install, upgrade and remove packages using RPM, YUM and Zypper.
-Obtain information on RPM packages such as version, status, dependencies, integrity and signatures.
-Determine what files a package provides, as well as find which package a specific file comes from.
-Awareness of dnf. The following is a partial list of the used files,terms and utilities:
-rpm
-rpm2cpio
-/etc/yum.conf
-/etc/yum.repos.d/
-yum
-zypper |
| Linux as a virtualization guest | Weight: 1
Description: Candidates should understand the implications of virtualization and cloud computing on a Linux guest system. Key Knowledge Areas:
-Understand the general concept of virtual machines and containers.
-Understand common elements virtual machines in an IaaS cloud, such as computing instances, block storage and networking.
-Understand unique properties of a Linux system which have to changed when a system is cloned or used as a template.
-Understand how system images are used to deploy virtual machines, cloud instances and containers.
-Understand Linux extensions which integrate Linux with a virtualization product.
-Awareness of cloud-init. The following is a partial list of the used files, terms and utilities:
-Virtual machine
-Linux container
-Application container
-Guest drivers
-SSH host keys
-D-Bus machine id
|
GNU and Unix Commands |
| Work on the command line | Weight:4
Description:Candidates should be able to interact with shells and commands using the command line. The objective assumes the Bash shell. Key Knowledge Areas:
-Use single shell commands and one line command sequences to perform basic tasks on the command line.
-Use and modify the shell environment including defining, referencing and exporting environment variables.
-Use and edit command history.
-Invoke commands inside and outside the defined path. The following is a partial list of the used files,terms and utilities:
-bash
-echo
-env
-export
-pwd
-set
-unset
-type
-which
-man
-uname
-history
-.bash_history
-Quoting |
| Process text streams using filters | Weight:2
Description:Candidates should be able to apply filters to text streams. Key Knowledge Areas:
-Send text files and output streams through text utility filters to modify the output using standard UNIX commands found in the GNU textutils package. The following is a partial list of the used files, terms and utilities:
-bzcat
-cat
-cut
-head
-less
-md5sum
-nl
-od
-paste
-sed
-sha256sum
-sha512sum
-sort
-split
-tail
-tr
-uniq
-wc
-xzcat
-zcat |
| Perform basic file management | Weight:4
Description:Candidates should be able to use the basic Linux commands to manage files and directories. Key Knowledge Areas:
-Copy, move and remove files and directories individually.
-Copy multiple files and directories recursively.
-Remove files and directories recursively.
-Use simple and advanced wildcard specifications in commands.
-Using find to locate and act on files based on type, size, or time.
-Usage of tar, cpio and dd. The following is a partial list of the used files, terms and utilities:
-cp
-find
-mkdir
-mv
-ls
-rm
-rmdir
-touch
-tar
-cpio
-dd
-file
-gzip
-gunzip
-bzip2
-bunzip2
-xz
-unxz
-file globbing |
| Use streams, pipes and redirects | Weight:4
Description:Candidates should be able to redirect streams and connect them in order to efficiently process textual data. Tasks include redirecting standard input, standard output and standard error, piping the output of one command to the input of another command, using the output of one command as arguments to another command and sending output to both stdout and a file. Key Knowledge Areas:
-Redirecting standard input, standard output and standard error.
-Pipe the output of one command to the input of another command.
-Use the output of one command as arguments to another command.
-Send output to both stdout and a file. The following is a partial list of the used files, terms and utilities:
-tee
-xargs |
| Create, monitor and kill processes | Weight:4
Description:Candidates should be able to perform basic process management. Key Knowledge Areas:
-Run jobs in the foreground and background.
-Signal a program to continue running after logout.
-Monitor active processes.
-Select and sort processes for display.
-Send signals to processes. The following is a partial list of the used files, terms and utilities:
-&
-bg
-fg
-jobs
-kill
-nohup
-ps
-top
-free
-uptime
-pgrep
-pkill
-killall
-watch
-screen
-tmux |
| Modify process execution priorities | Weight:2
Description:Candidates should should be able to manage process execution priorities. Key Knowledge Areas:
-Know the default priority of a job that is created.
-Run a program with higher or lower priority than the default.
-Change the priority of a running process. The following is a partial list of the used files, terms and utilities:
-nice
-ps
-renice
-top |
| Search text files using regular expressions | Weight:2
Description:Candidates should be able to manipulate files and text data using regular expressions. This objective includes creating simple regular expressions containing several notational elements as well as understanding the differences between basic and extended regular expressions. It also includes using regular expression tools to perform searches through a filesystem or file content. Key Knowledge Areas:
-Create simple regular expressions containing several notational elements.
-Understand the differences between basic and extended regular expressions.
-Understand the concepts of special characters, character classes, quantifiers and anchors.
-Use regular expression tools to perform searches through a filesystem or file content.
-Use regular expressions to delete, change and substitute text. The following is a partial list of the used files,terms and utilities:
-grep
-egrep
-fgrep
-sed
-regex(7) |
| Basic file editing | Weight:3
Description:Candidates should be able to edit text files using vi. This objective includes vi navigation, vi modes, inserting, editing, deleting, copying and finding text. It also includes awareness of other common editors and setting the default editor. Key Knowledge Areas:
-Navigate a document using vi.
-Understand and use vi modes.
-Insert, edit, delete, copy and find text in vi.
-Awareness of Emacs, nano and vim.
-Configure the standard editor. The following is a partial list of the used files, terms and utilities:
-vi
-/, ?
-h,j,k,l
-i, o, a
- d, p, y, dd, yy
-ZZ, :w!, :q!
-EDITOR |
Devices, Linux Filesystems, Filesystem Hierarchy Standard |
| Create partitions and filesystems | Weight:2
Description:Candidates should be able to configure disk partitions and then create filesystems on media such as hard disks. This includes the handling of swap partitions. Key Knowledge Areas:
-Manage MBR and GPT partition tables
-Use various mkfs commands to create various filesystems such as:
-ext2/ext3/ext4
-XFS
-VFAT
-exFAT
-Basic feature knowledge of Btrfs, including multi-device filesystems, compression and subvolumes. The following is a partial list of the used files,terms and utilities:
-fdisk
-gdisk
-parted
-mkfs
-mkswap |
| Maintain the integrity of filesystems | Weight:2
Description:Candidates should be able to maintain a standard filesystem, as well as the extra data associated with a journaling filesystem. Key Knowledge Areas:
-Verify the integrity of filesystems.
-Monitor free space and inodes.
-Repair simple filesystem problems. The following is a partial list of the used files,terms and utilities:
-du
-df
-fsck
-e2fsck
-mke2fs
-tune2fs
-xfs_repair
-xfs_fsr
-xfs_db |
| Control mounting and unmounting of filesystems | Weight:3
Description:Candidates should be able to configure the mounting of a filesystem. Key Knowledge Areas:
-Manually mount and unmount filesystems.
-Configure filesystem mounting on bootup.
-Configure user mountable removable filesystems.
-Use of labels and UUIDs for identifying and mounting file systems.
-Awareness of systemd mount units. The following is a partial list of the used files, terms and utilities:
-/etc/fstab
-/media/
-mount
-umount
-blkid
-lsblk |
| Manage file permissions and ownership | Weight:3
Description:Candidates should be able to control file access through the proper use of permissions and ownerships. Key Knowledge Areas:
-Manage access permissions on regular and special files as well as directories.
-Use access modes such as suid, sgid and the sticky bit to maintain security.
-Know how to change the file creation mask.
-Use the group field to grant file access to group members. The following is a partial list of the used files, terms and utilities:
-chmod
-umask
-chown
-chgrp |
| Create and change hard and symbolic links | Weight:2
Description:Candidates should be able to create and manage hard and symbolic links to a file. Key Knowledge Areas:
-Create links.
-Identify hard and/or soft links.
-Copying versus linking files.
-Use links to support system administration tasks. The following is a partial list of the used files,terms and utilities:
-ln
-ls |
| Find system files and place files in the correct location | Weight:2
Description:Candidates should be thoroughly familiar with the Filesystem Hierarchy Standard (FHS), including typical file locations and directory classifications. Key Knowledge Areas:
-Understand the correct locations of files under the FHS.
-Find files and commands on a Linux system.
-Know the location and purpose of important file and directories as defined in the FHS. The following is a partial list of the used files,terms and utilities:
-find
-locate
- updatedb
-whereis
-which
-type
-/etc/updatedb.conf |
There is no doubt that the IT examination plays an essential role in the IT field. On the one hand, there is no denying that the 101-500日本語 practice exam materials provides us with a convenient and efficient way to measure IT workers' knowledge and ability(101-500日本語 best questions). On the other hand, up to now, no other methods have been discovered to replace the examination. That is to say, the IT examination is still regarded as the only reliable and feasible method which we can take (101-500日本語 certification training), and other methods are too time- consuming and therefore they are infeasible, thus it is inevitable for IT workers to take part in the IT exam. However, how to pass the Lpi 101-500日本語 exam has become a big challenge for many people and if you are one of those who are worried, congratulations, you have clicked into the right place--101-500日本語 practice exam materials. Our company is committed to help you pass exam and get the IT certification easily. Our company has carried out cooperation with a lot of top IT experts in many countries to compile the 101-500日本語 best questions for IT workers and our exam preparation are famous for their high quality and favorable prices. The shining points of our 101-500日本語 certification training files are as follows.
Our company knows that time is precious especially for those who are preparing for Lpi 101-500日本語 exam, just like the old saying goes "Time flies like an arrow, and time lost never returns." We have tried our best to provide our customers the fastest delivery. We can ensure you that you will receive our 101-500日本語 practice exam materials within 5 to 10 minutes after payment, this marks the fastest delivery speed in this field. Therefore, you will have more time to prepare for the 101-500日本語 actual exam. Our operation system will send the 101-500日本語 best questions to the e-mail address you used for payment, and all you need to do is just waiting for a while then check your mailbox.
There are some important details that you need to know about the LPI 101-500 exam. One of the first things is that this test consists of around 60 questions that are based on the multiple-choice format or you can face with fill-in-the-blank. The students will have 90 minutes to answer all of these questions, so they better move faster. To pass this certification exam, the learners need to get a minimum score of 500 points out of 800. Note that the test is available in many languages, including English, German, Chinese (Traditional and Simplified), Japanese, Portuguese (Brazilian), and Spanish. LPI 101-500 costs $200.
Scheduling the 101-500 exam is very simple. All you need to do is register with the LPI and get your ID. After that, you will use the ID to create a Pearson VUE account. From there, you have to select your test. If you fail on your first try, you can take it again after waiting for at least 7 days. But if you still fail, you will have to wait for a month for your next attempt. Once you pass the exam, the certification is only valid for 5 years.
