Free demo before buying

We are so proud of high quality of our GB0-371-ENU exam simulation: Constructing H3C High-Performance Campus Networks, and we would like to invite you to have a try, so please feel free to download the free demo in the website, we firmly believe that you will be attracted by the useful contents in our GB0-371-ENU study guide materials. There are all essences for the IT exam in our Constructing H3C High-Performance Campus Networks exam questions, which can definitely help you to passed the IT exam and get the IT certification easily.

No help, full refund

Our company is committed to help all of our customers to pass H3C GB0-371-ENU as well as obtaining the IT certification successfully, but if you fail exam unfortunately, we will promise you full refund on condition that you show your failed report card to us. In the matter of fact, from the feedbacks of our customers the pass rate has reached 98% to 100%, so you really don't need to worry about that. Our GB0-371-ENU exam simulation: Constructing H3C High-Performance Campus Networks sell well in many countries and enjoy high reputation in the world market, so you have every reason to believe that our GB0-371-ENU study guide materials will help you a lot.

We believe that you can tell from our attitudes towards full refund that how confident we are about our products. Therefore, there will be no risk of your property for you to choose our GB0-371-ENU exam simulation: Constructing H3C High-Performance Campus Networks, and our company will definitely guarantee your success as long as you practice all of the questions in our GB0-371-ENU study guide materials. Facts speak louder than words, our exam preparations are really worth of your attention, you might as well have a try.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Under the situation of economic globalization, it is no denying that the competition among all kinds of industries have become increasingly intensified (GB0-371-ENU exam simulation: Constructing H3C High-Performance Campus Networks), especially the IT industry, there are more and more IT workers all over the world, and the professional knowledge of IT industry is changing with each passing day. Under the circumstances, it is really necessary for you to take part in the H3C GB0-371-ENU exam and try your best to get the IT certification, but there are only a few study materials for the IT exam, which makes the exam much harder for IT workers. Now, here comes the good news for you. Our company has committed to compile the GB0-371-ENU study guide materials for IT workers during the 10 years, and we have achieved a lot, we are happy to share our fruits with you in here.

Convenience for reading and printing

In our website, there are three versions of GB0-371-ENU exam simulation: Constructing H3C High-Performance Campus Networks for you to choose from namely, PDF Version, PC version and APP version, you can choose to download any one of GB0-371-ENU study guide materials as you like. Just as you know, the PDF version is convenient for you to read and print, since all of the useful study resources for IT exam are included in our Constructing H3C High-Performance Campus Networks exam preparation, we ensure that you can pass the IT exam and get the IT certification successfully with the help of our GB0-371-ENU practice questions.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. The IP address of the host PCA is 40.1.1.1, and the MAC address is 0011.1111.1111. The PCA is connected to the GigabitEthernet1/0/1 port of the switch SWA. The following commands are configured on the switch SWA:
[SWA]vlan 10
[SWA-vlan10]quit
[SWA]vlan 20
[SWA-vlan20]protocol-vlan ipv4
[SWA-vlan20]quit
[SWA]vlan 30
[SWA-vlan30]quit
[SWA]mac-vlan mac-address 0011-1111-1111 vlan 30
[SWA]vlan 40
[SWA-vlan40]ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[SWA-vlan40]quit
[SWA]interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1]port link-type hybrid
[SWA-GigabitEthernet1/0/1]port hybrid pvid vlan 10
[SWA-GigabitEthernet1/0/1]port hybrid vlan 10 20 30 40 untagged
[SWA-GigabitEthernet1/0/1]port hybrid protocol-vlan vlan 20 0
[SWA-GigabitEthernet1/0/1]port hybrid ip-subnet-vlan vlan 40
[SWA-GigabitEthernet1/0/1]mac-vlan enable
After the configuration is complete, it can be judged that PCA will join

A) VLAN30
B) VLAN40
C) The configuration command is incorrect
D) VLAN 10
E) VLAN20

2. The following statements about multicast routing protocols are correct:

A) In dense mode, the multicast data stream is flooded from the multicast source to every corner of the network by pushing, and the multicast receiver passively receives multicast packets
B) The multicast routing protocol has two modes: dense and sparse
C) In sparse mode, the multicast data stream is sent from the multicast source to the multicast receiver in a pull mode, and the multicast receiver actively sends and receives requests
D) Intra-domain multicast routing protocols include: MSDP, DVMRP, MOSPF, PIM

3. In the network as shown in the figure, after completing the corresponding configuration on the switch SWA, when the switch SWA receives the data frame from the PCA to access the PCB, it will judge whether to check the MAC address table or the routing table according to it.

A) VLAN attributes of data frames
B) Destination MAC address of the data frame
C) Source MAC address of the data frame
D) The source IP address of the data frame
E) Source MAC address of the data frame

4. What is correct about the interoperability between Sub VLANs in SuperVLAN technology?

A) Host IP addresses in different SubVLANs belong to the same network segment, but due to the isolation effect of Sub VLANs, it is impossible to achieve intercommunication between Sub VLANs.
B) The hosts in different SubVLANs are isolated at the second layer, and the third layer can communicate with each other through the ordinary proxy ARP technology of the Super VLAN interface
C) Host IP addresses in different SubVLANs belong to the same network segment, and they can communicate directly with each other through Layer 2 forwarding
D) Layer 2 isolation between hosts in different SubVLANs, Layer 3 can communicate with each other through the local proxy ARP technology of the Super VLAN interface

5. In the network as shown in the figure, the switch SWA is a Layer 2 switch, and the router RTA is the gateway of each PC. The following configuration is made on the router RTA:
[RTA]interface Ethernet 0/0
[RTA-Ethernet0/0]ip address 10.10.10.1 255.255.255.0
[RTA-Ethernet0/0]interface ethernet 0/0.2
[RTA-Ethernet0/0.2]ip address 20.20.20.1 255.255.255.0
[RTA-Ethernet0/0.2]vlan-type dotlq vid 2
[RTA-Ethernet0/0.2]interface ethernet 0/0.3
[RTA-Ethernet0/0.3]ip address 30.30.30.1 255.255.255.0
[RTA-Ethernet0/0.3]vlan-type dotlq vid 3
After completing the corresponding configuration on the switch SWA, PCA, PCB and PCC can ping their own gateway. The configuration of the switch SWA port Ethernet1/0/4 should be (choose one or more)

A) interface Ethernet 1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 10
B) interfaceEthernet 1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all
C) interface Ethernet1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 3
D) interfaceEthernet1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 2

Solutions: