安全具有保證的 200-120 題庫資料
在談到 200-120 最新考古題,很難忽視的是可靠性。我們是一個為考生提供準確的考試材料的專業網站,擁有多年的培訓經驗,Cisco 200-120 題庫資料是個值得信賴的產品,我們的IT精英團隊不斷為廣大考生提供最新版的 Cisco 200-120 認證考試培訓資料,我們的工作人員作出了巨大努力,以確保考生在 200-120 考試中總是取得好成績,可以肯定的是,Cisco 200-120 學習指南是為你提供最實際的認證考試資料,值得信賴。
Cisco 200-120 培訓資料將是你成就輝煌的第一步,有了它,你一定會通過眾多人都覺得艱難無比的 Cisco 200-120 考試。獲得了 CCNA 認證,你就可以在你人生中點亮你的心燈,開始你新的旅程,展翅翱翔,成就輝煌人生。
選擇使用 Cisco 200-120 考古題產品,離你的夢想更近了一步。我們為你提供的 Cisco 200-120 題庫資料不僅能幫你鞏固你的專業知識,而且還能保證讓你一次通過 200-120 考試。
購買後,立即下載 200-120 題庫 (CCNA Cisco Certified Network Associate CCNA (803)): 成功付款後, 我們的體統將自動通過電子郵箱將您已購買的產品發送到您的郵箱。(如果在12小時內未收到,請聯繫我們,注意:不要忘記檢查您的垃圾郵件。)
免費一年的 200-120 題庫更新
為你提供購買 Cisco 200-120 題庫產品一年免费更新,你可以获得你購買 200-120 題庫产品的更新,无需支付任何费用。如果我們的 Cisco 200-120 考古題有任何更新版本,都會立即推送給客戶,方便考生擁有最新、最有效的 200-120 題庫產品。
通過 Cisco 200-120 認證考試是不簡單的,選擇合適的考古題資料是你成功的第一步。因為好的題庫產品是你成功的保障,所以 Cisco 200-120 考古題就是好的保障。Cisco 200-120 考古題覆蓋了最新的考試指南,根據真實的 200-120 考試真題編訂,確保每位考生順利通過 Cisco 200-120 考試。
優秀的資料不是只靠說出來的,更要經受得住大家的考驗。我們題庫資料根據 Cisco 200-120 考試的變化動態更新,能夠時刻保持題庫最新、最全、最具權威性。如果在 200-120 考試過程中變題了,考生可以享受免費更新一年的 Cisco 200-120 考題服務,保障了考生的權利。

200-120 題庫產品免費試用
我們為你提供通过 Cisco 200-120 認證的有效題庫,來贏得你的信任。實際操作勝于言論,所以我們不只是說,還要做,為考生提供 Cisco 200-120 試題免費試用版。你將可以得到免費的 200-120 題庫DEMO,只需要點擊一下,而不用花一分錢。完整的 Cisco 200-120 題庫產品比試用DEMO擁有更多的功能,如果你對我們的試用版感到滿意,那么快去下載完整的 Cisco 200-120 題庫產品,它不會讓你失望。
雖然通過 Cisco 200-120 認證考試不是很容易,但是還是有很多通過的辦法。你可以選擇花大量的時間和精力來鞏固考試相關知識,但是 Sfyc-Ru 的資深專家在不斷的研究中,等到了成功通過 Cisco 200-120 認證考試的方案,他們的研究成果不但能順利通過200-120考試,還能節省了時間和金錢。所有的免費試用產品都是方便客戶很好體驗我們題庫的真實性,你會發現 Cisco 200-120 題庫資料是真實可靠的。
最新的 CCNA 200-120 免費考試真題:
1. Refer to the exhibit.
A technician has installed SwitchB and needs to configure it for remote access from the management workstation connected to SwitchA. Which set of commands is required to
accomplish this task?
A) SwitchB(config)# ip default-gateway 192.168.8.254 SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown
B) SwitchB(config)# ip default-network 192.168.8.254 SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown
C) SwitchB(config)# interface vlan 1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# ip default-gateway 192.168.8.254 255.255.255.0 SwitchB(config-if)# no shutdown
D) SwitchB(config)# ip route 192.168.8.254 255.255.255.0 SwitchB(config)# interface FastEthernet 0/1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown
E) SwitchB(config)# interface FastEthernet 0/1 SwitchB(config-if)# ip address 192.168.8.252 255.255.255.0 SwitchB(config-if)# no shutdown
2. What are three benefits of implementing VLANs? (Choose three.)
A) A higher level of network security can be reached by separating sensitive data traffic from other network traffic.
B) A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure.
C) A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure.
D) Broadcast storms can be mitigated by increasing the number of broadcast domains, thus reducing their size.
E) VLANs make it easier for IT staff to configure new logical groups, because the VLANs all belong to the same broadcast domain.
F) Broadcast storms can be mitigated by decreasing the number of broadcast domains, thus increasing their size.
G) Port-based VLANs increase switch-port use efficiency, thanks to 802.1Q trunks.
3. What is the effect of using the service password-encryption command?
A) Only the enable secret password will be encrypted.
B) Only the enable password will be encrypted.
C) It will encrypt the secret password and remove the enable secret password from the configuration.
D) It will encrypt all current and future passwords.
E) Only passwords configured after the command has been entered will be encrypted.
4. Refer to the exhibit.
A technician is troubleshooting host connectivity issues on the switches. The hosts in VLANs 10 and 15 on Sw11 are unable to communicate with hosts in the same VLANs on Sw12. Hosts in the Admin VLAN are able to communicate. The port-to-VLAN assignments are identical on the two switches. What could be the problem?
A) The Fa0/1 port is not operational on one of the switches.
B) The link connecting the switches has not been configured as a trunk.
C) Port FastEthernet 0/1 needs to be configured as an access link on both switches.
D) At least one port needs to be configured in VLAN 1 for VLANs 10 and 15 to be able to communicate.
E) A router is required for hosts on SW11 in VLANs 10 and 15 to communicate with hosts in the same VLAN on Sw12.
5. Which of the following correctly describe steps in the OSI data encapsulation process? (Choose two.)
A) Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
B) The transport layer divides a data stream into segments and may add reliability and flow control information.
C) The presentation layer translates bits into voltages for transmission across the physical link.
D) Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
E) The data link layer adds physical source and destination addresses and an FCS to the segment.
問題與答案:
| 問題 #1 答案: A | 問題 #2 答案: A,B,D | 問題 #3 答案: D | 問題 #4 答案: B | 問題 #5 答案: A,B |


0位客戶反饋